Connect with us

News

How to Mask Images With the Cutout Lab in Corel Photo Paint

Published

on

[ad_1]

In this tutorial we’re going to be working with the Cutout Lab. At some point when working with images you’ll realize that you want to isolate an image from the background. As a result, you’ll have to create what is called a mask and this allows you to use the object in a variety of compositions.

Fortunately, PHOTO-PAINT offers you a wide variety of tools that you can use, of which the Cutout Lab is one. We’re going to start cutting this image out from the background in a moment, but before we do, I want to draw your attention to the Objects docker on the right. You’ll notice the background image, there’s an Object that I’ve filled with green and a copy of the background that we’re going to use as our working Object, or layer, when we’re creating the mask.

The purpose of the green layer is for when we finish the masking process and we’ve exited the Cutout Lab. What I do at this point is I zoom into the image and look at the edges of the mask, which I check against this high contrast background, to make sure that there are no artifacts, or holes in the image. Once that’s done I’ve completed the masking process.

At this point I’ll turn the top background object (layer) on and make sure it’s activated. And now we’re ready to access the Cutout Lab. One last point, when cutting out an image, you can use a mouse, but it’s unwieldy and clumsy, a bit like painting with a baseball bat. I recommend that you use a drawing tablet instead. I use the Wacom 6×8 Intuos 3 tablet.

So let’s get into it. The first thing to do is to go to Image: Cutout Lab. In the Cutout Lab dialog we’re ready to start masking the image, but before we get into it, we need to zoom in more closely so we can see what we’re doing. I click on the Zoom icon and zoom into the Cactus.

The next thing to do is to make use of the highlight tool and using it to define an edge around the cactus. The default tip is a bit too small, so I’ll dial it up a bit, to 19. So now I highlight the edge, which lays some color over the cactus and the background. And this is needed in order to create a mask. When working around the spines, there’s are a bit unwieldy with a tool tip of this size, so I’ll dial down the size of the nib. If you mak a mistake in the the image, simply click on the Eraser tool and remove what you’ve done.

To work your way around the cactus, use the Pan tool or the scrolling bars, defining the edge. In some cases, you’ll find areas where the detail is critical. In that case, zoom in. Of course you’ll have to make the nib a bit smaller.

Once we’ve defined the edge of the mask, we’re ready to zoom out and apply the fill, in preparation for previewing. To do so, zoom out to see the entire image and click on the paint bucket. The fill color is blue, which is the default, but it could be any other color. Now, click on the center of the cactus to fill it.

Now we’re ready to create an image preview. At this point the background is set to None which will give us a checkboard pattern when I click on Preview. Now we want to zoom into the image and start cleaning up the edge. In some cases this checkerboard pattern might be a bit difficult to work with, so we can choose from one of several options: gray matte, black matte or white matte. In this case we’ll start off with grayscale matte and I’ll zoom into the image.

Now you can see what’s happening with the edge, which is some artifacting and raggedness of the edge. Parts of the mask appear to have holes in it, as well. We need to tidy this up by way of the touchup tools, which add detail or take it away. To begin, I’ll click on the Remove Detail tool, dial up the size, and start removing some of this artifacting. You’ll need to do this around the entire image. You can do some of this after the fact with the high contrast layer, but I try to do as much of it as possible here. In the event that parts of the mask look ragged on the inside, or incomplete, click on the Add Detail tool to fill in the gaps.

In some cases, the gray matte might not give us enough information as to what’s happening with the edge, so we can toggle to a different option, such as black matte. This allows us to see more of what’s happening with edge and also if there are any holes. This is what you need to do around the entire image.

Now that the cleaning up is complete, we’re ready to make a cutout, which you can then use with other compostions. To do so, you have three options: Cutout, Cutout and Original Image or Cutout as click mask. For our purposes, I’ll choose Cutout and original image, then click on OK. The end result is a new object at the top of the Objects docker, the cutout image and the original below it.

This is where my acid test comes into play. We turn off the object below the new cutout and now we see straight through to my green high contrast object. We can look at it in more detail and see if it needs further retouching. To do so, zoom in to the edge and see what’s happening. In this case the edge is still a bit ragged, which we can improve by using the eraser tool. And we slowly work our way around the image, erasing those bits as necessary.

Here, the edge is fairly sharp. If you want to soften it a bit, we would use feathering, but that’s the subject of another video.

[ad_2]

Source by Nathan Segal

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

News

Where to Find Those Efficient and Hardworking Affiliates?

Published

on

[ad_1]

Everyone wants a hardworking affiliate, employee, associate, partner, or even spouse, and why not? It’s the next best thing to doing the work yourself. However with the massive outbreak of work and income opportunities available online, how can you beat everyone else and find that one (or more) ideal person who will make your online business explode with success? Here are some of the most ingenious and uncommon ways to snag the idea affiliates for your affiliate program

Direct Sales Agents

Direct sales people are really one of the most enterprising, hard-working individuals in business. They mostly work on commissions or rebates and are willing to literally go door-to-door offering their products to anyone and everyone they bump into. Imagine how much easier their job would be if they could be an affiliate and simply work via the Internet and a mobile device or desktop.

Also, most direct sales people tend to carry more than one brand in their product arsenal so signing up as an affiliate would be almost the same type of work but using a different approach.

Colleges and Universities

Many college kids would be interested in a part-time income opportunity if it would mean funds to help pay for their education, loan, or partying. All you have to do is make sure to offer them products they can endorse as a student.

Freelancers

Did you know that the U.S. Census Bureau’s latest annual report show that 75% of U.S. businesses used freelancers in 2011? Freelancers earned a whopping US$990 billion in 2011 which is a 4.1% increase from the previous year. The only industries where the number of freelancers decreased were in insurance, finance, and construction. Most probably your affiliate program isn’t a part of these 3 industries.

Furthermore, online business and finance experts are predicting the growth to increase incrementally every year even with an economy that is improving. People just want income security and more control over their earnings. With the spate of lay-offs, it’s understandable why many would prefer to work as an affiliate than as an employee.

Scout For Them At Affiliate Conventions

There are annual affiliate conventions held in different cities around the country. You should try to catch one when it is held somewhere near your location. The average turn-out for these types of conventions has increased regularly over the years. Last year, many of them were sold out weeks before the event.

Advertise!

The US Census Bureau has said that as of 2012, 15% of Americans are poor, 43% of young adults depend on their parents to some extent for money. Even more surprising is that the median income of young adults in 1982 was $31,583 and last year it was $30,604 for the same age group! Income is dropping and people are looking for ways to earn additional income outside of their 9 to 5 jobs. That’s where you can come in playing the hero and helping others realize their dream income.

Finally, go online and talk about your product. Make the affiliate marketers come to you and have the luxury of picking the best candidates. You will need some help in marketing your affiliate program so target a marketer who’s experienced in affiliate program and SEO.

[ad_2]

Source by Lina Stakauskaite

Continue Reading

News

Recession Is Here… Six Costly Mistakes Home Sellers Make During Recessions And How To Avoid Them

Published

on

[ad_1]

The U.S. is officially in a recession. What is a recession? A recession is a business cycle contraction or general economic decline due to significant drop in spending and other commercial activities. Most pundits and politicians will blame Covid-19 crisis for the recession, but even pre-Covid-19 the proverbial writing was on the wall.

The U.S. had over 120 months of economic growth, which was the longest expansion in the modern history. Other indicators, such as negative yield spread on treasuries (long term bonds having lower interest rates than short term T-notes), were pointing to an imminent change of the economic cycle and an impending recession. The only real question was: when and how bad?

Then Covid-19 came… If the cycle was going to change anyway, Covid-19 acted as a huge and unexpected accelerant to make the recession much more immediate and severe.

Inevitably during recessions all classes of real estate, including residential homes and condominiums, will be negatively impacted as lower consumer spending and higher unemployment rates affect real estate prices and marketing times.

Here are the six costly mistakes home and other real property sellers make during recessions and how to avoid them:

Mistake #1: This will pass and real estate market will be hot again soon

First thing to remember is that real estate cycles are much longer than general economic cycles. Even if the general economy recovers, which eventually it always does, a typical real estate cycle takes as long as 10 to 15 years. The cycle has four key stages: Top, Decline, Bottom and Rise.

Let us consider the last real estate cycle, which lasted approximately 14 years:

  • 2006 – Prices hit the Top
  • 2006 to 2012 – Prices Decline
  • 2012 – Prices hit the Bottom (Trough)
  • 2012 to 2019 – Prices Rise*
  • 2020 – Prices hit the Top
  • 2020 to? – Prices Decline

*NOTE: In 2016 the national residential real estate price index reached its pre-recession 2006 peak levels. It took 10 years for the real estate market to recover.

The way to avoid this mistake is to recognize that real estate cycles take years to run and plan accordingly. Additionally, nobody knows for sure when the prices will hit the top or bottom until after the fact.

Mistake #2: Low interest rates will make the economy and real estate market rebound

Between 2006 and 2011 the interest rates (Fed Funds) were continuously cut by the Federal Reserve Board and went from low 5% to almost 0%. However, that did not stop the real estate recession and depreciation of property values.

Undoubtedly, low interest rates made the economic decline and real estate recession less severe and saved some properties from foreclosures, but it still took six painful years for the real estate market to hit the bottom and then four more years for the prices to go back to their pre-recession levels.

Some markets had never fully recovered. For example, residential home prices in some parts of California, Arizona and Nevada are still below their 2006 highs.

To avoid this mistake, one needs to realize that although low interest rates help stimulate the economy and the real estate market, they do not cure them.

Mistake #3: I don’t need to sell now, so I don’t care

If you do not need to sell until the cycle plays out, which typically is over ten years, then you will not be as affected, especially if you have a strong equity position, limited mortgage debt, and solid liquid assets.

However, it is good to keep in mind that “life happens” and either professional or personal circumstances can change and we may need to sell property before the downturn runs its course.

Furthermore, if a property has a mortgages and its value declines to the point being “upside down,” meaning the mortgage loan balance exceeds the value of the property, then the options of selling, refinancing or even obtaining an equity line of credit, will be significantly limited.

This does not mean that everybody should be rushing into selling their real estate if there is no need to do so, just keep in mind that circumstances may and often do change and property options will be affected, so plan in advance. As one wise proverb says: “Dig your well before your thirst.”

Mistake #4: I’m selling, but I won’t sell below my “bottom line” price

This is a common and potentially very costly mistake. Generally speaking, every seller wants to sell for the highest price and every buyer wants to pay the lowest price. That’s nothing new. When selling real estate, most sellers want to achieve a certain price point and/or have a “bottom line.”

However, it is important to understand that the market does not care what the Seller, or his/her Agent, think the property value should be at. The market value is a price a willing and able buyer will pay, when a property is offered on an open market for a reasonable amount of time.

Overpricing property based on Seller’s subjective value or what is sometimes called an “aspirational price,” especially in a declining market, is a sure first step to losing money. When a property lingers on the market for an extended period of time, carrying costs will continue to accumulate and property value will depreciate in line with the market conditions.

Additionally, properties with prolonged marketing times tend to get “stale” and attract fewer buyers. The solution is to honestly assess your selling objectives, including the desired time-frame, evaluate your property’s attributes and physical condition, analyze comparable sales and market conditions, and then decide on market-based pricing and marketing strategies.

Mistake #5: I will list my property for sale only with Agent who promises the highest price

Real estate is a competitive business and real estate agents compete to list properties for sale which generate their sales commission incomes. It is not unusual that Seller will interview several agents before signing an exclusive listing agreement and go with the agent who agrees to list the property at the highest price, often regardless if such price is market-based.

Similarly to Mistake #4, this mistake can be very damaging to Sellers, as overpriced properties stay on the market for extended periods of time costing Sellers carrying expenses such as mortgage payments, property taxes, insurance, utilities and maintenance.

Furthermore, there is the “opportunity cost” since the equity is “frozen,” and it cannot be deployed elsewhere till the property is sold. However, the most expensive cost is the loss of property value while the real estate market deteriorates.

During the last recession, we have seen multiple cases where overpriced properties stayed on the market for years and ended up selling for 25% to 40% below their initial fair market values.

The solution is to make sure that your pricing strategy is based on the market, not empty promises or wishful thinking.

Mistake #6: I will list my property only with Agent who charges the lowest commission

Real estate commission rates are negotiable and not set by law. A commission usually represents the highest transactional expense in selling real properties and is typically split between Brokers and Agents who work on the transaction

Some real estate agents offer discounted commissions, in order to induce Sellers to list their properties with them. But does paying a discounted commission ensure savings for the Seller? Not necessarily.

For example, if the final sales price is 5% to 10% below property’s highest market value, which is not that unusual, due to inadequate marketing, bad pricing strategy, and/or poor negotiation skills, it will easily wipe out any commission savings and actually cost the Seller tens of thousands of dollars in lost revenues.

The solution is to engage an agent who is a “Trusted Advisor,” not just a “Salesperson.” A Trusted Advisor will take his/her time and effort to do the following: 1) Perform Needs Analysis: listen and understand your property needs and concerns; 2) Prepare Property Analysis: thoroughly evaluate your property and market conditions; 3) Execute Sales and Marketing Plan: prepare and implement custom sales and marketing plan for your property; and 4) Obtain Optimal Results: be your trusted advocate throughout the process and achieve the best possible outcome.

Finding such a real estate professional may not be always easy, but it certainly is worth the effort and will pay off at the end.

In conclusion, this article has outlined six costly mistakes real estate Sellers make during recessions and how to avoid them. The first mistake is not understanding that real estate cycles are long and take years. The second mistake is a misconception that low interest rates alone will create a recovery. Another mistake is not realizing that circumstances may change and not planning in advance. Mistakes number four, five and six pertain to understanding the market value, proper pricing and selecting the right real estate professional.

By understanding and avoiding these mistakes, real estate Sellers have significantly better chances of minimizing the negative impact of a recession while selling their properties.

[ad_2]

Source by Robert W. Dudek

Continue Reading

News

Useful Tips To Build The Best Gaming Computer

Published

on

[ad_1]

Every gamer will want their computer to be the best gaming computer among their peers. Sometimes, with a little knowledge and tips and tricks, it is possible to build the best gaming computer and show it off to your peers. This article will show you how:

1) You can’t get the best gaming computer from computer retailers

If you want to get the best gaming computer, you have to build your own. Different gamers have different requirement for their gaming machine. Unless you are willing to pay a high price, you will not be able to buy a commercial computer that fulfills all your gaming needs. The only option you have is to build your own gaming computer.

2) You don’t have to be rich to build the best gaming computer

It is not necessary to burn a hole in your pocket to build the best gaming computer. With some due diligence, do some market research and compare prices around the marketplace. Merchant such as TigerDirect and NewEgg give regular discount to their products and you could save a lot of money if you catch them during their promotional period.

3) Most expensive parts do not have to be the best part

Sometime, the latest model or the most expensive model does not have to be the best part for your computer. It requires various components to work together to form the best computer system. When choosing a computer part, what matters is how well it can integrate with the rest of the components. Compatibility is more important than individual performance. What use is there if you spend lot of money on the latest quad-core processor and find that your motherboard doesn’t support it?

4) You don’t need to change the whole PC to own the best gaming computer

It is a misconception that you have to change the whole gaming machine to build the best gaming computer. If you already have a good barebone system, what you need to do is to upgrade the necessary parts and your gaming computer can roar back to life instantly.

5) Brand is important

Unless you want to see your computer system malfunction every few days, it is important that you purchase the parts from branded manufacturers with strict quality control. Motherboard brand such as Gigabyte, ABIT, ASUS are some quality brands that you can consider

If you follow diligently to the tips stated above. You will be on your way to build the best gaming computer. While price can be an issue, it is better not to scrimp on important computer parts such as motherboard, CPU, RAM and graphics card as it will cost you more to upgrade in the future.

[ad_2]

Source by Damien Oh

Continue Reading

Tags

Live Statistics

Trending